KNUTH MODEL "KHT H CNC" HYDRAULIC SHEAR |
|
| Stock Code: |
16186 |
| Price: | $RFQ |
| Subcategory: | Hydraulic Shears |
| Manufacturer: |
Knuth |
| Model: |
KHT H CNC |
| Condition: | New |
|
KHT H 3006 CNC | KHT H 3010 CNC | KHT H 3013 CNC | KHT H 3016 CNC | KHT H 4006 CNC | KHT H 4010 CNC | KHT H 4013 CNC | KHT H 6006 CNC | KHT H 4016 CNC |
|---|
| Working Area |
| Plate thickness (max.) | 0.24 in | 0.39 in | 0.51 in | 0.63 in | 0.24 in | 0.39 in | 0.51 in | 0.24 in | 0.63 in |
| Working length | 121 in | 121 in | 121 in | 121 in | 161 in | 161 in | 161 in | 240 in | 161 in |
| Throat | 6 in |
| Cutting angle | 0.3 - 2 deg | 0.3 - 2 deg | 0.3 - 2.3 deg | 0.3 - 2.5 deg | 0.3 - 2 deg | 0.3 - 2 deg | 0.3 - 2.3 deg | 0.3 - 1.5 deg | 0.3 - 2.5 deg |
| Strokes per minute | 20 | 19 | 19 | 14 | 17 | 18 | 16 | 13 | 13 |
| Hold-down | 13 positions | 16 positions | 16 positions | 18 positions | 20 positions | 20 positions | 19 positions | 29 positions | 20 positions |
| Hold-down capacity | 17.6 t | 22 t | 27.5 t | 44 t | 27.5 t | 27.5 t | 55 t | 38.5 t | 55 t |
| Table size | 131x19x31 in | 132x20x32 in | 132x22x33 in | 133x22x33 in | 172x20x32 in | 172x21x32 in | 173x23x33 in | 247x23x35 in | 173x24x35 in |
| Back Gauge |
| Rear stop | 39 in |
| Feed speed X-axis | 3.9 in/min |
| Front Support Arms |
| Number of support arms | 3 positions | 3 positions | 3 positions | 3 positions | 4 positions | 4 positions | 4 positions | 6 positions | 4 positions |
| Length of support arms | 35 in |
| Drive Capacity |
| Motor rating main drive | 14.8 Hp | 29.5 Hp | 40.2 Hp | 49.6 Hp | 14.8 Hp | 29.5 Hp | 40.2 Hp | 29.5 Hp | 49.6 Hp |
| Hydraulic tank volume | 40 gal | 66 gal | 66 gal | 92 gal | 40 gal | 66 gal | 66 gal | 66 gal | 92 gal |
| Measures and Weights |
| Overall dimensions (length x width x height) | 154x82x77 in | 155x84x84 in | 156x85x89 in | 158x87x96 in | 195x83x82 in | 196x86x91 in | 197x87x94 in | 272x86x93 in | 197x89x104 in |
| Weight | 15,400 lbs | 20,900 lbs | 25,300 lbs | 33,660 lbs | 21,340 lbs | 30,250 lbs | 36,080 lbs | 48,400 lbs | 50,160 lbs |
These guided hydraulic plate shears with CNC-controlled back gauge, kerf and cutting angle combine high quality and reliability with a user-friendly design
Machine Frame
- The very rigid and heavy machine frame has been welded to tight tolerances and annealed
- The machine frame has been machined on a state-of-the-art 5-axis milling machine in one single setup to ensure more precise cuts and extended life
- All components subject to tensile loads have been carefully constructed and designed with large radii to permanently eliminate the risk of cracking
- The table features a bottom cutter mount and cutter bar and has been designed for minimal torsion and optimum load distribution
- All components were treated in a modern paint and drying system and feature two coats of paint, each coat with a minimum thickness of 60 micron
Material Support
- The large work table features roller balls and a rigid lateral angular stop for easy handling and safe plate alignment
- Long, sturdy support arms safely hold large plates
Hydraulics
- Polished pistons on both hydraulic cylinders feature superior 2 micron surface grades, ensuring a long seal life
- Cylinder bodies are forged from high-strength SAE 1040 material
- The entire hydraulic system is reliable, low-maintenance and easy to service
- During the cut, hydraulically regulated hold-downs ensure steady fixation of the sheet metal plate close to the cut-line
Back Gauge and Control
- Length, thickness, and strength of the plate material can easily be entered by the user into the programmable control unit, which then automatically will select the appropriate positions for kerf, cutting angle and cutting length
- The back gauge system is very robust and perfectly suited for rough production environments
- Linear guides and preloaded ball screws are mounted in a protective enclosure
Equipment