Woodworking Equipment > Drill Presses
Drill Presses for Sale
Drill Press 14" Floor Mount w/Table Delta
Model: 14-070 [Delta]
S/N: W9623
w/Table & Fence
1/2Hp; 1Ph; 115/230Volt
Drill Press 13" Bench Top w/Table & Fence
Model: PM263733 [Project Master]
S/N: 801629
13" Bench Top w/Light; Table; Fence
1/3Hp; 1Ph; 115/230Volt
Drill Press 16" Floor Mount - Jet
Model: 354176 JDP17DX [Jet]
S/N: 8120073
3/4Hp; 1Ph; 115Volt
Working AreaMax. drill capacity(ST 37) ˉ 50 inTable set up area48x14 inNumber of T-slots3 positionsT-slots, width0.6 inT-slots, spacing3.7 inDetailsThread cutting capacity0.8 inTravelsTravel X-axis23.6 inTravel Y-ax
Mark Super SMark Super SV
Working AreaTable dimensions31x9 inDrilling capacity in steel1 inGuide width7 in5 inShaft milling1.26 in0.98 inHead elevation14 in15 inNumber of table T-slots3
Working AreaTable set up area29x8 inTable load capacity (max.)220 lbsNumber of table T-slots3 positionsT-slot table (width x spacing)0.55x2.48 inT-slot foot (qty)2 positionsT-slot foot (width x spacing)0.55x7.87 inQ
Working AreaDrilling capacity0.98 inTable set up area11x12 inSpindle axis-to-table surface distance4.33 - 15.94 inThroat9 inVertical head travel12 inHeadstockSpeed range(8) 100 - 2,900 rpmSpindle taperMK 3 / MT 3 Qu
Working AreaTable set up area28x8 inTable load capacity (max.)220 lbsNumber of table T-slots3 positionsT-slot table (width x spacing)0.55x1.97 inT-slot foot (qty)2 positionsT-slot foot (width x spacing)0.55x7.87 inQ
Working AreaDrilling capacity1.57 inTapping capacity, steelM 24 Table set up area22x19 inTable stroke18 inQuill stroke7 inTable swivel range (max.)± 45? Spindle nose-to-table distance (max.)24 inSpindle nose-to-foot
Working AreaDrilling capacity1.57 inTapping capacity, steelM 24 Table set up area21x17 inQuill stroke7 inManual table travel22.44 inPowered table travel16.93 inTable swivel range (max.)± 45? Column diameter6 inSpind
KSB 32AKSB 40BKSB 50CKSB 63B
Working AreaDrilling capacity1.26 in1.57 in1.97 in2.48 inFeed force, axial (max.)9 16 16 30 Throat11 in13 in13 in15 inVertical head travel8 in8 in8 in10 inQ
Working AreaTable set up area28x8 inTable load capacity (max.)220 lbsNumber of table T-slots3 positionsT-slot table (width x spacing)0.55x1.97 inT-slot foot (qty)2 positionsT-slot foot (width x spacing)0.55x7.87 ins
SSB 40 F SuperSSB 50 F Super
Working AreaDrilling capacity1.57 in1.97 inTapping capacity, steelM 24 M 30 Table set up area21x17 in23x18 inQuill stroke7 in8 inManual table travel22.44 in
Working AreaDrilling capacity0.98 inTable set up area16x22 inT-slots, width0.6 inNumber of T-slots3 positionsQuill stroke8 inTable stroke12 inFeed Z-axis(9) 0.0022 - 0.0709 in/RFeed force, axial (max.)9 Spindle nose
Working AreaDrilling capacity0.71 inDrilling depth (max.)4 inThroat7 inColumn diameter3 inTable dimensions12x12 inFoot set up area (length x width)19x13 inHeadstockSpindle mountMK 2 / MT 2 Spindle speed(12) 230 - 2,
KST 16VKSS 25VKST 25KST 16KSS 32
Working AreaDrilling capacity0.63 in0.98 in0.98 in0.63 in1.26 inColumn diameter3 in4 in3 in3 in4 inQuill stroke4 in5 in4 in4 in5 inThroat7 in9 in7 in7 i
KB 20 SKB 32 SFKB 20 SVKB 32 SFV
Working AreaDrilling capacity0.79 in1.26 in0.79 in1.26 inTapping capacity (max.)M 20 M 24 M 16 M 24 Table set up area10x10 in13x13 in10x10 in15x16 inSpi
SSB 32 XnSSB 40 Xn
Working AreaDrilling capacity1.26 in1.57 inTapping capacity, steelM 20 M24 Table set up area20x17 in21x17 inTable stroke19 in22 inQuill stroke6 in7 inTable swivel ran
TSB 25TSB 35
Working AreaDrilling capacity0.98 in1.38 inTapping capacity, steelM 16 M 22 Foot set up area (length x width)12x13 in15x14 inVertical head travel19 in20 inSpindle nose-to-f
Part No.
101715
Table movement via hand-crank and gear rack
Tool holder bits and chuck
Related Subcategories:
Categories:
- X woodworking equipment (85)
- X Drill Presses (85)
- Accessories & Tooling (23)
- X Drill Presses (62)
Manufacturer:
Price:
- to